Author Topic: Hot springs jetsetter no power (Read 4869 times)

griffj17 · « **on:** December 08, 2015, 09:11:30 am »

I walked outside this morning to run my hot tub on the clean cycle. I noticed the gfci was tripped. I reset it and there's no power to the hot tub. I replaced the circuit board to it back in the summer and haven't had any issues until today. Can someone let me know what maybe going with this...

Hot Tub Forum · « **on:** December 08, 2015, 09:11:30 am »

griffj17 · « **Reply #1 on:** December 08, 2015, 09:23:14 am »

Update.
As soon as I put a tester on it. It trips the gfci.

griffj17 · « **Reply #2 on:** December 09, 2015, 03:04:41 pm »

Still having issues if anyone can help me out. Replaced the gfci, replaced the power cord. Tub starts to cycle and then trips the gfci.

BullFrogSpasMN · « **Reply #3 on:** December 09, 2015, 04:07:33 pm »

faulty board, faulty heater, faulty circ pump, could be a number of things, do you have access to a volt meter? and do you know how to use it? if not it might be best to call a repair company to come look at it

av8r · « **Reply #4 on:** December 10, 2015, 08:25:59 am »

Not what you want to hear, but it's pretty hard to troubleshoot when there's so little information. A pro will understand the steps and get this resolved quickly for you.

griffj17 · « **Reply #5 on:** December 10, 2015, 11:28:38 am »

I think I finally figured it out. I disconnected the high limit switches and the circulator kicked on withought tripping the gfci. The reset wasn't tripped so I'm guessing the heater is bad.

Hot Tub Forum · « **Reply #5 on:** December 10, 2015, 11:28:38 am »

Hot Tub Forum

News: