Welcome to our forum.
Hello,Could anyone with experience of running and using hot tub during cold season offer some advise on what works and what does not. Specifically how to control water, refilling, optimal temperature settings and how long the water temperature would stay above freezing during power outage? I personally have Marquis Euphoria that should be fully insulated. Thank you very much.
This is my first winter, and I am thinking (and this is just my theory) to run tub in economy mode all the time. Set filter cycles to run BEFORE the time I want to use the tub. This way water would be heated up during those cycles and with 208V heater I expect this to be pretty quickly. If water does not heat up enough (I have temperature set to 100F) then I would increase duration of the relevant filter cycle (right now they are set at factory 1 hour each). This should eliminate need for me to maintain constant temperature at times when tub is not in use. After each use tub has "cleaning mode" where it automatically detects that no one has been using tub for more than one hour and starts cleaning cycle, time for which can also be adjusted.What do you think about this approach?