What's the Best Hot Tub

Author Topic: bengal- secondary suction screen  (Read 2545 times)

afosomf

  • Guest
bengal- secondary suction screen
« on: July 14, 2004, 10:34:49 am »
How do i replace this screen, it took me 2 hours to get on.  there must be easier way,


thanks

Hot Tub Forum

bengal- secondary suction screen
« on: July 14, 2004, 10:34:49 am »

Chas

  • Mentor Level Member
  • ******
  • Posts: 6481
  • Hot water is Cool.
    • Spas etc.
Re: bengal- secondary suction screen
« Reply #1 on: July 14, 2004, 03:37:28 pm »
You shouldn't have to replace it very often - once a year - maybe longer.

The older models had a spin-on cover with a latch behind it which was pretty hard to get to. Use a knife blade or a small screwdriver to lift the little latch and then spin the cover off. The newer tubs have two stainless steel screws clearly visible and easily removable.

The screen helps the pumps to live longer, and helps a bit with water clarity. It can usually be left in place and simply hosed off when the water is changed. If yours is loading up, you might want to try to keep the contaminants out of the tub if possible.
Former HotSpring Dealer - Southern Cal.

Hot Tub Forum

Re: bengal- secondary suction screen
« Reply #1 on: July 14, 2004, 03:37:28 pm »

 

Home    Buying Guide    Featured Products    Forums    Reviews    About    Contact   
Copyright ©1998-2024, Whats The Best, Inc. All rights reserved. Site by Take 42