What's the Best Hot Tub

Author Topic: Heater Replacement for J-480  (Read 3348 times)

zeen

  • Junior Member
  • *
  • Posts: 2
Heater Replacement for J-480
« on: June 06, 2015, 08:47:51 pm »
Hi all, great forum you have here.  I did some searching, and didn't find any reference to this issue.

The heater in my 2009 Jacuzzi J-480 has shorted, and is also leaking a bit. The part number on it is Therm Products C2550-0316tI, like this:  http://www.hottubwarehouse.com/remote-heater-assembly-c2550-0316ti?gclid=CNf5-uif_MUCFQqIfgod7Q8Asg  That includes the junction box and and wiring harness, which are still fine on mine, and I'd rather save money and re-use them than toss them out. I've found a lot of things that look like just the tube part for half the price of the entire unit, but none of them explicitly state they can be used to repair the C2550-0316tI.

Does anyone know if I can save money and landfill space this way, or do I just have to pony up and buy the complete unit?


Hot Tub Forum

Heater Replacement for J-480
« on: June 06, 2015, 08:47:51 pm »

Bigralphy

  • Junior Member
  • *
  • Posts: 38
Re: Heater Replacement for J-480
« Reply #1 on: June 06, 2015, 11:07:02 pm »
You should be able to change the element inside.  Should be around 50 bucks

zeen

  • Junior Member
  • *
  • Posts: 2
Re: Heater Replacement for J-480
« Reply #2 on: June 06, 2015, 11:19:35 pm »
You should be able to change the element inside.  Should be around 50 bucks

Thanks for the reply.  I did see they sell just the element, but mine has visible corrosion and is leaking, so I have to replace the tube part as well.

Hot Tub Forum

Re: Heater Replacement for J-480
« Reply #2 on: June 06, 2015, 11:19:35 pm »

 

Home    Buying Guide    Featured Products    Forums    Reviews    About    Contact   
Copyright ©1998-2024, Whats The Best, Inc. All rights reserved. Site by Take 42