What's the Best Hot Tub

Author Topic: Hot tub surface  (Read 2791 times)

Riley012

  • Junior Member
  • *
  • Posts: 3
Hot tub surface
« on: May 15, 2015, 09:22:11 pm »
I have this light sand paper scaly coating on my hot tub surface. Can anyone tell me what mite be causing this? You can rub most of it off with your hand, except at the water line where it is a little harder to get off. Thanks for any help

Hot Tub Forum

Hot tub surface
« on: May 15, 2015, 09:22:11 pm »

Kev B

  • Full Member
  • ***
  • Posts: 155
Re: Hot tub surface
« Reply #1 on: May 16, 2015, 10:38:30 am »
 Proper water balance is a major key to preventing sugar scale from forming. What is your ph and alkalinity readings?

MarKee

  • Full Member
  • ***
  • Posts: 967
Re: Hot tub surface
« Reply #2 on: May 18, 2015, 01:33:41 am »
It's caused by the pH getting very high and the calcium coming out of suspension in the water. The sand paper feel is calcium sticking to the sides of the water. Whatever you do, don't drain the spa because it will harden and be very hard to remove. Best way to remove it is to get pH down and get the pH really low in the spa. That will soften it up and allow it to be wiped off with a little bit of scrubbing. Mr Clean Magic Erasers work well for removing the scale.

seabeece2

  • Junior Member
  • *
  • Posts: 12
Re: Hot tub surface
« Reply #3 on: May 18, 2015, 10:49:09 am »
I'm having trouble with high PH as well can I just use baking soda to bring it down.

wmccall

  • Global Moderator
  • Mentor Level Member
  • *****
  • Posts: 7431
    • https://www.facebook.com/BillMcCall1959/
Re: Hot tub surface
« Reply #4 on: May 18, 2015, 11:45:29 am »
I'm having trouble with high PH as well can I just use baking soda to bring it down.

Baking soda will raise PH and alkalinity.
Member since 2003.  Owner Dynasty Excalibur 2003-2012.   Sundance Majesta from 2012-current

seabeece2

  • Junior Member
  • *
  • Posts: 12
Re: Hot tub surface
« Reply #5 on: May 18, 2015, 01:14:25 pm »
What's the best way to lower it?

Sam

  • Senior Member
  • ****
  • Posts: 1335
Re: Hot tub surface
« Reply #6 on: May 18, 2015, 03:57:47 pm »
Go to a hot tub store and ask for PH reducer.

Hot Tub Forum

Re: Hot tub surface
« Reply #6 on: May 18, 2015, 03:57:47 pm »

 

Home    Buying Guide    Featured Products    Forums    Reviews    About    Contact   
Copyright ©1998-2024, Whats The Best, Inc. All rights reserved. Site by Take 42