What's the Best Hot Tub

Author Topic: Tiger River Heating  (Read 1884 times)

RLJ

  • Junior Member
  • *
  • Posts: 2
Tiger River Heating
« on: May 16, 2015, 10:56:58 am »
I have a Tiger River that recently will not heat completely to temperature. Only gets warm. Have changed filters and reset tube. What could the problems be?

Hot Tub Forum

Tiger River Heating
« on: May 16, 2015, 10:56:58 am »

Jacuzzi Jim

  • Ultimate Member
  • *****
  • Posts: 3584
Re: Tiger River Heating
« Reply #1 on: May 16, 2015, 01:14:32 pm »
  You should check the voltage to the heater and confirm it's getting 220v.  If so then it's most likely a bad element or maybe in an economy mode and only heating during a filter cycle.   If it's not getting power you need to find out why not.
 
   Bad board, temp sensor or pressure switch possibly something else .   Any error codes on the display?

RLJ

  • Junior Member
  • *
  • Posts: 2
Re: Tiger River Heating
« Reply #2 on: May 17, 2015, 10:01:11 am »
No error codes. It acts like it is at the correct temp but is 10 degrees lower

Hot Tub Forum

Re: Tiger River Heating
« Reply #2 on: May 17, 2015, 10:01:11 am »

 

Home    Buying Guide    Featured Products    Forums    Reviews    About    Contact   
Copyright ©1998-2024, Whats The Best, Inc. All rights reserved. Site by Take 42