Author Topic: Floor models... (Read 3351 times)

Interface · « **on:** March 06, 2015, 11:06:16 pm »

What are peoples thoughts about floor models as a way to get more tub for our $? I have seen several now... no water in them currently but I presume they were filled at some point. Is there any risk that I should be aware of? I am looking at some of the more pricey tubs but not too worried about customizing it if I can have a good deal. I have never bought a tub before so just wonder if its been running for a year straight on a showroom floor is it really a big deal?

Thanks!

Dave

Hot Tub Forum · « **on:** March 06, 2015, 11:06:16 pm »

Jacuzzi Jim · « **Reply #1 on:** March 07, 2015, 12:51:50 am »

Nothing at all wrong with floor models, and they may have not been filled. Usually will carry a full warranty, and if were running any kinks that may happen at start up would have been taken care of.

First day of a 3 day home show today I sold 2 Jacuzzi J-335s at a great price, one a floor model the other not.

girlinhotwater · « **Reply #2 on:** March 07, 2015, 01:48:28 pm »

I bought an empty floor model two years ago and have had no issues. Saved some money, and the warranty started the day it was delivered so didn't make a difference to me other than in my checking account

Interface · « **Reply #3 on:** March 08, 2015, 01:43:22 am »

Thanks for the replies. Much appreciated.

richierich · « **Reply #4 on:** March 08, 2015, 06:08:10 pm »

The Sundance Optima I purchased two years ago was a dry floor model. It's been great and I saved some money.

Interface · « **Reply #5 on:** March 20, 2015, 08:48:45 am »

Pulled the trigger. After a wet test on the top two choices Grandee and Bullfrog A7 we went with the floor model A7. Negotiated to just under 10K for a fully loaded dry floor model including stereo, lift assist, extra filters and chemicals . Thanks so much for all the information on this forum. It is a great resource and I look forward to continued lurking here. Now to finish the pad and build that pallet bar

Sam · « **Reply #6 on:** March 20, 2015, 11:03:08 am »

Quote from: Interface on March 20, 2015, 08:48:45 am

Pulled the trigger. After a wet test on the top two choices Grandee and Bullfrog A7 we went with the floor model A7. Negotiated to just under 10K for a fully loaded dry floor model including stereo, lift assist, extra filters and chemicals . Thanks so much for all the information on this forum. It is a great resource and I look forward to continued lurking here. Now to finish the pad and build that pallet bar

Congrats! You got a good deal.

Hot Tub Forum · « **Reply #6 on:** March 20, 2015, 11:03:08 am »

Hot Tub Forum

News: