What's the Best Hot Tub

Author Topic: Used Tub Setup  (Read 2188 times)

UnHombre

  • Junior Member
  • *
  • Posts: 6
Used Tub Setup
« on: December 17, 2014, 10:33:59 am »
I recently purchased a used tub from a friend. The tub was drained, cleaned, filters washed, and the tub was placed in storage by the dealer. During my setup, I noticed that the clear water lines had some scaling coming lose inside the tubes. I would like to know if I should replace the filters and flush the system before using it. Any other tips on setting up/getting this tub running will greatly be appreciated.

Thanks

Hot Tub Forum

Used Tub Setup
« on: December 17, 2014, 10:33:59 am »

Kev B

  • Full Member
  • ***
  • Posts: 155
Re: Used Tub Setup
« Reply #1 on: December 17, 2014, 11:00:51 am »
 Best thing is to fill it, add a pipe cleaner such as swirl away and run the heck out of it. Make sure all jets are going and leave filters out. Run it for a day, drain, clean refill and put in filters.

UnHombre

  • Junior Member
  • *
  • Posts: 6
Re: Used Tub Setup
« Reply #2 on: December 17, 2014, 11:08:14 am »
New filters?

Tman122

  • Ultimate Member
  • *****
  • Posts: 4424
  • If it Ain't Broke
Re: Used Tub Setup
« Reply #3 on: December 17, 2014, 05:49:16 pm »
Retired

Hot Tub Forum

Re: Used Tub Setup
« Reply #3 on: December 17, 2014, 05:49:16 pm »

 

Home    Buying Guide    Featured Products    Forums    Reviews    About    Contact   
Copyright ©1998-2024, Whats The Best, Inc. All rights reserved. Site by Take 42