What's the Best Hot Tub

Author Topic: Sundance / Winchester Jumper Configuration  (Read 2209 times)

overlandsea

  • Junior Member
  • *
  • Posts: 14
Sundance / Winchester Jumper Configuration
« on: June 02, 2014, 10:17:23 am »
I just got a 2005 Winchester Imperial (made by Sundance/Jacuzzi). I was wondering if anyone knows where I can find a diagram for jumper configuration for 30/50 amp configurations. I'm trying to first determine which it is set up for now, and secondly decide if I want/need to change it.

Thanks!

Hot Tub Forum

Sundance / Winchester Jumper Configuration
« on: June 02, 2014, 10:17:23 am »

Jacuzzi Jim

  • Ultimate Member
  • *****
  • Posts: 3584
Re: Sundance / Winchester Jumper Configuration
« Reply #1 on: June 02, 2014, 01:43:01 pm »
 A picture of the board might be helpful.       Looking in my old tech book jumper 1-2 off enables 50amp  jumper 1-2 on or jumped enables 15/30 amp logic.  the Winchester mdls were sold through Cosco I believe so not sure if the bard is the same??

overlandsea

  • Junior Member
  • *
  • Posts: 14
Re: Sundance / Winchester Jumper Configuration
« Reply #2 on: June 02, 2014, 09:11:13 pm »
Hopefully this picture helps. I can zoom in on a certain area if I need to.


overlandsea

  • Junior Member
  • *
  • Posts: 14
Re: Sundance / Winchester Jumper Configuration
« Reply #3 on: June 09, 2014, 12:37:54 am »
Well I never could get the picture to work. However, upon further inspection, I found that the wiring diagram including the jumper configurations was printed on the inside of the cover panel. Jacuzzi Jim had it right on for my spa: 1-2 off=50 amp, on = 30 amp.Thanks for the help!
« Last Edit: June 09, 2014, 12:46:57 am by overlandsea »

Hot Tub Forum

Re: Sundance / Winchester Jumper Configuration
« Reply #3 on: June 09, 2014, 12:37:54 am »

 

Home    Buying Guide    Featured Products    Forums    Reviews    About    Contact   
Copyright ©1998-2024, Whats The Best, Inc. All rights reserved. Site by Take 42