Is Gecko In.therm heater part can be replaced by a serviceable brand?

[Joe Blow]

Since Gecko In.Therm heater with the integrated flow sensor can not be repaired, is it possible to replace it by another brand that is serviceable? The flow sensor broke on mine and because all the parts are fixed with epoxy in that badly designed system we must change the whole part 400$!!!  On a serviceable system like my old one it cost me 30$ to repair the same problem!

[Tman122]

I think you can get a serviceable control panel and heater for about the same money.

[Ryan VSO]

240$ on internet

[Tman122]

Spend a little more...

http://www.hottubwarehouse.com/Balboa-VS500Z-Spa-Control-System-Complete-54219-Z-p/54219-z.htm?gclid=CK6LvoTjqb0CFTIV7AodQQ0AEQ

[Ryan VSO]

Spend a little more...

http://www.hottubwarehouse.com/Balboa-VS500Z-Spa-Control-System-Complete-54219-Z-p/54219-z.htm?gclid=CK6LvoTjqb0CFTIV7AodQQ0AEQ

I doubt this work , we use the gecko in.therm along with the gecko in.xm because the in.xm support 3 pumps + blower and the in.xe cant . Im assuming that you have at least 3 pumps am i correct ?

[Joe Blow]

I have two pumps so I find interesting the balboa kit you suggest Tman122!

[Tman122]

http://www.hottubwarehouse.com/Balboa-VS510Z-Spa-Control-System-Complete-54218-Z-p/54218-z.htm