Author Topic: Still shopping....... (Read 68111 times)

Tman122 · « **Reply #120 on:** January 12, 2014, 07:11:59 pm »

There are pads out there like EZ Pad and there's others. But you shouldn't need one if the concrete is good.

Hot Tub Forum · « **Reply #120 on:** January 12, 2014, 07:11:59 pm »

Mudheadsports · « **Reply #121 on:** January 12, 2014, 09:06:36 pm »

Concrete is fine....dirty but fine!!!!!

. Driveway getting de-iced.....pathway shoveled....Tuesday still delivery day!!!!!

meriflower · « **Reply #122 on:** January 12, 2014, 10:52:48 pm »

You know we expect pictures!

Mudheadsports · « **Reply #123 on:** January 13, 2014, 06:39:38 pm »

Ok...so delivery is on for tomorrow between 8-12.....pathway is shoveled.....we are the first stop!!!!!! Now I'll have to figure out how to post pics here......

Tman122 · « **Reply #124 on:** January 13, 2014, 06:43:11 pm »

I use photo bucket to host pictures then you can link em to here.

Mudheadsports · « **Reply #125 on:** January 13, 2014, 06:56:23 pm »

We'll give it a try!!!!!

rosewoodsteel · « **Reply #126 on:** January 14, 2014, 01:10:54 pm »

Well?

rosewoodsteel · « **Reply #127 on:** January 14, 2014, 06:39:32 pm »

Mudhead,
Did you get your spa?

Mudheadsports · « **Reply #128 on:** January 14, 2014, 08:57:06 pm »

It's here it's here it's here ITS HERE!!!!!!!!!! Arrived this morning.....the guys had it off the truck and down the hill to the pad before I could get outside, I asked if they had done this before...lol......had to turn it 90 degrees from where we thought becaudpse of the lifter. Our view of the woods would have been completely blocked. So now the only heighbor in view is blocked!!!!!! So, tomorrow is the $1800.00 electrician.....then fill. Read the booklet and add the chemicals....get the mineral do dad installed...turn the heater on.....and wait!!!!!!!!!

Sorry to keep you in suspense...had a project that I needed to finish tonight.....no playing on the internet....until now of course!!!!!!
Thanx again guys for all your help!!!!! Will give you the update again tomorrow......it's going to be another long day!!!!!

Tman122 · « **Reply #129 on:** January 14, 2014, 09:44:51 pm »

Fill it when the electrician is wiring it.

Mudheadsports · « **Reply #130 on:** January 15, 2014, 08:12:06 am »

So you can check to see that everything is running while he is here? Give me an idea of how long they take to fill.....of course it's snowing right now!!!!!!!!

Water Boy · « **Reply #131 on:** January 15, 2014, 10:36:37 am »

I agree with Tman. It will most likely take a hour or so to fill depending on your water pressure. But yes, if you do fill it, then you can turn it on while the electrician is still there to make sure it powers on fine.

meriflower · « **Reply #132 on:** January 15, 2014, 12:16:11 pm »

Yes, that is what we did when we got ours last week. Make sure to put the hose in the filter area to prevent air lock. Also if you have a water softener you want to turn that off before filling. I also add metal and scale control when the tub is half full.

rin-spa-aic · « **Reply #133 on:** January 15, 2014, 01:23:16 pm »

Quote from: Tman122 on January 14, 2014, 09:44:51 pm

Fill it when the electrician is wiring it.

+1 Good advice

I like to fill from the hot water tap (I split the one to my washing machine). My start up temp is 90 degrees and I can be in the tub in a very short period of time.

rosewoodsteel · « **Reply #134 on:** January 15, 2014, 06:29:32 pm »

Quote from: rin-spa-aic on January 15, 2014, 01:23:16 pm

Quote from: Tman122 on January 14, 2014, 09:44:51 pm
Fill it when the electrician is wiring it.

+1 Good advice

I like to fill from the hot water tap (I split the one to my washing machine). My start up temp is 90 degrees and I can be in the tub in a very short period of time.

You must have a big-ass water heater.

Hot Tub Forum · « **Reply #134 on:** January 15, 2014, 06:29:32 pm »

Hot Tub Forum

News: