Hot Springs ACE test strips

[Bert2013]

Bought HS Gleam with ACE system. Been somewhat easy as a first-timer but just took reading on strip and Hardness, PH and ALK all in normal ranges. TBr and FCl read 0. So I am at a loss as to what exactly I am to do. Add chlorine, though I have ACE system? My settings are on 7 output. Please help newbie out on what exactly I am supposed to do to get normal water levels. I did the salt water test strip and it was also normal.

[Chas]

Yes, if you need to get the chlorine level up you can hit "boost," but if 24 hours late it isn't high enough, add some dichlor.

 

[Alpha pools and spas]

May sound silly but is the ACE system functioning   if you do a salt test with the ace system you should get a message telling you if its working or not

[Bert2013]

At this point in my learning curve, there are no silly questions. I did strip for salt content and it was fine. I have not been adding much chlorine at all and did not test yesterday after adding some, so I will check and report back so I can continue to elarn. All advice I have gathered here has been very helpful!!

[Hot Spring Official]

Hi Bert2013,

Thank you for your business!  If you'd like, give us a ring and we'd be happy to help you get going in the right direction!

Thanks,
Steve