What's the Best Hot Tub

Author Topic: Ground Lug Broken on Silent Flow Circulation Pump  (Read 2309 times)

robinleigh

  • Junior Member
  • *
  • Posts: 3
Ground Lug Broken on Silent Flow Circulation Pump
« on: July 09, 2013, 09:12:02 pm »
Hi,  The gound lug is broken on my Silent Flow circulating pump.  Do you have to use the copper wire or can I splice it to a smaller wire that will fit under the screw on the pump?  Thanks

Hot Tub Forum

Ground Lug Broken on Silent Flow Circulation Pump
« on: July 09, 2013, 09:12:02 pm »

Jacuzzi Jim

  • Ultimate Member
  • *****
  • Posts: 3584
Re: Ground Lug Broken on Silent Flow Circulation Pump
« Reply #1 on: July 09, 2013, 11:12:31 pm »
 The pump is prolly already grounded through the wire with the power cord from the pump.  Skip it you will be fine..  Look for a green wire.

Chas

  • Mentor Level Member
  • ******
  • Posts: 6481
  • Hot water is Cool.
    • Spas etc.
Re: Ground Lug Broken on Silent Flow Circulation Pump
« Reply #2 on: July 11, 2013, 01:11:56 am »
No HotSpring spa has ever been made which did NOT have a ground wire built into the power cord. Even the older models which have a plug and outlet for the circ pump have a ground wire built into that cord.

The ground wire is an extra safety device, but not a must have item. Most circ pumps last about 5 to 7 years - you will be replacing it by then. At that time, you can reconnect with the ground if you like.

HTH

 8)
Former HotSpring Dealer - Southern Cal.

Hot Tub Forum

Re: Ground Lug Broken on Silent Flow Circulation Pump
« Reply #2 on: July 11, 2013, 01:11:56 am »

 

Home    Buying Guide    Featured Products    Forums    Reviews    About    Contact   
Copyright ©1998-2024, Whats The Best, Inc. All rights reserved. Site by Take 42