I have a Hot Springs Jetsetter that I emptied, cleaned and refilled 3 days ago. I found the emptying/refill instructions given to me at purchase to be wanting... There were none! So, I drained it with a hose off each spigot, cleaned the filters, then refilled the tub placing the hose in the filter compartment. I did not place the hose directly down the filter tube that houses the saltwater cell, and this may have caused my problem.
Since it was turned back on, I have a repetitive belching of large bubbles coming up with the hot water in the floor about every 4 seconds. I have run jets, turned diverters.... Help!! How do I get the air out of my system?