What's the Best Hot Tub

Author Topic: HotSpring - Vista 2011 - circulation pump  (Read 2630 times)

robmet1015

  • Junior Member
  • *
  • Posts: 26
HotSpring - Vista 2011 - circulation pump
« on: July 24, 2011, 11:20:55 pm »
I am researching for a new tub and was trying to see how much water per hour the SilentFlo 5000® circulation pump filters each hour?  Does anyone know this answer or a resource to serach on?

I am comparing the various other features with tubs and curious how much water is filtered in this tub...

Thanks.

Rob
« Last Edit: July 25, 2011, 08:30:25 am by robmet1015 »

Hot Tub Forum

HotSpring - Vista 2011 - circulation pump
« on: July 24, 2011, 11:20:55 pm »

TwinCitiesHotSpring

  • Full Member
  • ***
  • Posts: 972
Re: HotSpring - Vista 2011 - circulation pump
« Reply #1 on: July 25, 2011, 01:04:27 am »
the entire body of water in the Vista (500gal.) will "turn over" 12 times per 24hours approx.
« Last Edit: July 25, 2011, 01:08:16 am by TwinCitiesHotSpring »

robmet1015

  • Junior Member
  • *
  • Posts: 26
Re: HotSpring - Vista 2011 - circulation pump
« Reply #2 on: July 25, 2011, 08:32:40 am »
the entire body of water in the Vista (500gal.) will "turn over" 12 times per 24hours approx.

Thank you.  Where did you see this info at?

Spatech_tuo

  • Mentor Level Member
  • ******
  • Posts: 6340
Re: HotSpring - Vista 2011 - circulation pump
« Reply #3 on: July 25, 2011, 10:56:19 am »
the entire body of water in the Vista (500gal.) will "turn over" 12 times per 24hours approx.

Thank you.  Where did you see this info at?

It was either published and he copied it to you or he simply knows the gallons/minute of that pump and did the math for you knowing the size of the body of water.
220, 221, whatever it takes!

TwinCitiesHotSpring

  • Full Member
  • ***
  • Posts: 972
Re: HotSpring - Vista 2011 - circulation pump
« Reply #4 on: July 25, 2011, 04:08:01 pm »
the entire body of water in the Vista (500gal.) will "turn over" 12 times per 24hours approx.

Thank you.  Where did you see this info at?


I do not believe I have ever seen this info. published in any "customer literature" but in some service documents there is a procedure on how to test the flow on a circ pump which are service techs do on "end of warranty inspection" visits using a standpipe and a bucket....that plus some math (ok a calculator lol) and I came up with the numbers above

Hot Tub Forum

Re: HotSpring - Vista 2011 - circulation pump
« Reply #4 on: July 25, 2011, 04:08:01 pm »

 

Home    Buying Guide    Featured Products    Forums    Reviews    About    Contact   
Copyright ©1998-2024, Whats The Best, Inc. All rights reserved. Site by Take 42