What's the Best Hot Tub

Author Topic: Quick Question Re: Hot Spring Filter Door  (Read 2778 times)

Richs100

  • Full Member
  • ***
  • Posts: 858
  • From a 1993 HS Prodigy to a 2006 HS Envoy
Quick Question Re: Hot Spring Filter Door
« on: January 18, 2009, 01:49:37 pm »
Recently, I've noticed that the top half of the filter door (the weir?) on my 06 Envoy floats up and out of the side tracks and then is unable to drop down when I turn on the jets.  Is there supposed to be some kind of a clip or cap on the top of the slides that would prevent this?  I've checked the bottom of the filter compartment for any loose parts, but didn't find anything.

Thanks,
Rich
If you don't have anything nice to say about someone, come sit next to me.

Hot Tub Forum

Quick Question Re: Hot Spring Filter Door
« on: January 18, 2009, 01:49:37 pm »

hottubdan

  • Ultimate Member
  • *****
  • Posts: 2323
  • In the spa business for over 20 years.
Re: Quick Question Hot Spring Filter Door
« Reply #1 on: January 18, 2009, 02:48:01 pm »
Quote
Recently, I've noticed that the top half of the filter door (the weir?) on my 06 Envoy floats up and out of the side tracks and then is unable to drop down when I turn on the jets.  Is there supposed to be some kind of a clip or cap on the top of the slides that would prevent this?  I've checked the bottom of the filter compartment for any loose parts, but didn't find anything.

Thanks,
Rich
There should be two pins, one on each track that prevent this.
Award winning Hot Spring dealer for a gazillion years.

kokanee001

  • Junior Member
  • *
  • Posts: 65
Re: Quick Question Hot Spring Filter Door
« Reply #2 on: January 18, 2009, 04:45:28 pm »
Yes, the pins are at the top of the tracks on each side to keep the filter door from coming up past the top of the tracks.

Richs100

  • Full Member
  • ***
  • Posts: 858
  • From a 1993 HS Prodigy to a 2006 HS Envoy
Re: Quick Question Hot Spring Filter Door
« Reply #3 on: January 18, 2009, 06:31:01 pm »

Well I guess they have to be somewhere in the bottom of the filter compartment.  Where else could they have gone, right?
If you don't have anything nice to say about someone, come sit next to me.

Gomboman

  • Senior Member
  • ****
  • Posts: 1656
  • My Pride and Joy
Re: Quick Question Hot Spring Filter Door
« Reply #4 on: January 20, 2009, 02:25:42 am »
The pins in my Envoy also came out. I never found them for some reason. The HS tech inserted a threaded screw into the top hole to fix mine. It will never come out now.

It should be covered under warranty but you could easily do this yourself if your dealer charges a hefty trip charge. Good luck.....
2005 Hot Spring Envoy still going strong. Million-Mile Club....

I want to get in the spa business so I can surf the internet and use Photoshop all day long.

Hot Tub Forum

Re: Quick Question Hot Spring Filter Door
« Reply #4 on: January 20, 2009, 02:25:42 am »

 

Home    Buying Guide    Featured Products    Forums    Reviews    About    Contact   
Copyright ©1998-2024, Whats The Best, Inc. All rights reserved. Site by Take 42