Ok I am going to try and keep this short.....About a month ago I was out of town for the holidays and somehow or another my tub froze. It did get to about -20 and the breaker tripped from a tranformer blowing. So I got everything defrosted and was very fortunate to just have to replace a pressure regulator that was leaking. After everything I noticed that it would only heat to about 75 - 80 degrees, so I replaced the heating element. Well all seemed fixed until one day I was going to use it and I noticed the temp have spiked to 125 degrees. Some of the plastic components became deformed but that seemed about it. So I reset the tub, it cooled down, but now it will only heat to about 90-95 degrees. Did the heating element go again, or is there something else I should be looking at? Thanks much!!