What's the Best Hot Tub

Author Topic: 2003 Sundance Tango service  (Read 2206 times)

tangoguy

  • Junior Member
  • *
  • Posts: 1
2003 Sundance Tango service
« on: December 14, 2008, 10:58:08 am »
I've got a 2003 Sundance Tango.  There is a tee fitting that goes into the heater.  One feed of the tee comes from the circulation pump, the other, smaller feed is connected to a plastic tube that comes from the filter discharge.  Theres a small plastic fitting the screws into the tee with a barbed end that the plastic tube fits over.  This small fitting has broken twice and floooded my basement.

I'm trying to get the Sundance part number for this fitting.   The service guys at the dealer I bought the tub from havent been very helpful.  They recently gave me a fitting, but its got a very restictive oriface on it and I dont think its right.

Can anyone tell me where to get a drawing for a 2003 Sundance Tango that has the part number on it.  Has anyone had a similar problem.  I replaced the fitting with a brass fitting and it corroded in 4 months.

Thanks

Hot Tub Forum

2003 Sundance Tango service
« on: December 14, 2008, 10:58:08 am »

SerjicalStrike

  • Full Member
  • ***
  • Posts: 796
  • Reinstate Hank Williams!!
    • Great Bay Spa and Sauna
Re: 2003 Sundance Tango service
« Reply #1 on: December 15, 2008, 11:39:20 am »
The fitting the tech gave you was the correct one.  It is restricted so it does not draw a lot of flow from the circulation pump.  The part number is 6540-034
« Last Edit: December 15, 2008, 11:39:50 am by SerjicalStrike »

Hot Tub Forum

Re: 2003 Sundance Tango service
« Reply #1 on: December 15, 2008, 11:39:20 am »

 

Home    Buying Guide    Featured Products    Forums    Reviews    About    Contact   
Copyright ©1998-2024, Whats The Best, Inc. All rights reserved. Site by Take 42