Envoy Weir Door Problem

[tonyp]

The Weir door on my Envoy came off track.  Around that time, I noticed a little white "pin" by the tube.  I assumed that this pin is what kept the door from coming too far up.  There are 2 holes in the track about an inch apart.  Assuming I am right, which hole does the pin go it?

[Gomboman]

I had a problem with my door coming off also. The tech put a screw into the right lower hole to keep it from coming out.

[tonyp]

I used an automotive upholstery pin.  A little plastic pin $0.23 at the local hardware.  I put it in the top hole.  I'll move it to the bottom.  Thanks.