What's the Best Hot Tub

Author Topic: Remove Insulation Foam  (Read 22539 times)

86ward

  • Junior Member
  • *
  • Posts: 2
Remove Insulation Foam
« on: August 06, 2007, 05:30:24 pm »
Hello,

 

I moved my tub and I have several leaks in my hot tub, the model is a Catalina.  However I can not access the plumbing      
Due to the insulation foam they have sprayed it with.  How do I remove this foam, I have tried several chemicals but nothing seems to work
besides pouring gasoline and setting it on fire, does anyone know how I can remove this foam to acess the plumbing?  Thank you


Hot Tub Forum

Remove Insulation Foam
« on: August 06, 2007, 05:30:24 pm »

Cola

  • Full Member
  • ***
  • Posts: 247
  • Time for bed kids
Re: Remove Insulation Foam
« Reply #1 on: August 06, 2007, 06:16:43 pm »
A knife - be carefull
Your fingers

Steve

The_real_Clown_Shoes

  • Full Member
  • ***
  • Posts: 443
  • Hot Spring Salesman since '05.
Re: Remove Insulation Foam
« Reply #2 on: August 06, 2007, 06:16:58 pm »
Good old fashioned chisel and dig.

104 degrees

  • Full Member
  • ***
  • Posts: 384
Re: Remove Insulation Foam
« Reply #3 on: August 06, 2007, 07:18:18 pm »
date=1186438603]A knife - be carefull
Your fingers

Steve[/quote]


The pipes too :)

86ward

  • Junior Member
  • *
  • Posts: 2
Re: Remove Insulation Foam
« Reply #4 on: August 06, 2007, 08:41:07 pm »
Please tell me there is another way? I have knifed and chissled to the bone, but thanks for the advise.

Dr. Spa™ Ret.

  • Ultimate Member
  • *****
  • Posts: 3377
  • Retired (mostly) from the industry after 33 years
Re: Remove Insulation Foam
« Reply #5 on: August 06, 2007, 10:02:37 pm »
I always like a small claw hammer.
If you can't sell it on eBay, it may not even qualify as landfill.

Retired (mostly) from the industry after 33 years...but still putzing around with a consumer information website, and trying to sell obsolete owners manuals

hotubinn

  • Full Member
  • ***
  • Posts: 148
  • I love YaBB 1G - SP1!
Re: Remove Insulation Foam
« Reply #6 on: August 07, 2007, 01:31:09 am »
Screwdriver works also!

rick

  • Full Member
  • ***
  • Posts: 205
Re: Remove Insulation Foam
« Reply #7 on: August 07, 2007, 11:40:22 am »
You poor bastard.  

FF spas.   More efficient?  Not.   Less prone to leaks?   Not.    Pain in the ass to find a leak?    Bingo!


(poking in my Coleman,  wow!  the plumbing's right in front of my face)   what a novel concept.


Pretty sad when the FF advocates here offer nothing but sarcasm for advice.    And you forgot one:

"try a divining rod,  just point it at the foam and it will steer you to the leak"         :D

How many times have I heard them all say,  "finding a leak in a FF spa is not that hard"    

Appearantly it is.





Jacuzzi Jim

  • Ultimate Member
  • *****
  • Posts: 3584
Re: Remove Insulation Foam
« Reply #8 on: August 07, 2007, 12:15:43 pm »
Quote
You poor bastard.  

FF spas.   More efficient?  Not.   Less prone to leaks?   Not.    Pain in the ass to find a leak?    Bingo!


(poking in my Coleman,  wow!  the plumbing's right in front of my face)   what a novel concept.


Pretty sad when the FF advocates here offer nothing but sarcasm for advice.    And you forgot one:

"try a divining rod,  just point it at the foam and it will steer you to the leak"         :D

How many times have I heard them all say,  "finding a leak in a FF spa is not that hard"    

Appearantly it is.






 If you know what your doing its not that difficult,for the average home owner thats never done it, its a learning experience.

East_TX_Spa

  • Mentor Level Member
  • ******
  • Posts: 5687
  • 30 Year HotSpring Spa Dealer
    • I Love My Spa
Re: Remove Insulation Foam
« Reply #9 on: August 07, 2007, 12:28:04 pm »
http://www.catalinaspas.com/ourtechnology.htm

Thermal Pain must not be dat easy either.

Terminator
Just layin' low and chucklin' in my stomach wif' da fidgets...

Richs100

  • Full Member
  • ***
  • Posts: 858
  • From a 1993 HS Prodigy to a 2006 HS Envoy
Re: Remove Insulation Foam
« Reply #10 on: August 07, 2007, 12:49:58 pm »
Quote
You poor bastard.  

How many times have I heard them all say,  "finding a leak in a FF spa is not that hard"    

Appearantly it is.


Hey Rick
As Term just pointed out by his link, CATALINA IS A THERMAL PANE SPA!  

I think 86ward is having trouble with the insulating foam they have sprayed on the bottom the tub and the plumbing.

I wonder what the cause of his leaks were?  Could it be vibration? Lack of Support? Insufficient insulation?  I wonder.......

Maybe if it was a full foam spa, it wouldn't have these leaks to begin with?  I wonder.....

Rich




If you don't have anything nice to say about someone, come sit next to me.

rick

  • Full Member
  • ***
  • Posts: 205
Re: Remove Insulation Foam
« Reply #11 on: August 07, 2007, 01:44:48 pm »
Doh!    :o


Hang on guys,  it takes a while to pull one's foot out of one's mouth!


PS:  Catalina is not the TP that my grandfather drove.  Looks more like a Prius,    a hybrid.

I thought the whole point of TP was while maintaining energy efficiency,  to be able to access the innards painlessly.  





Quote
http://www.catalinaspas.com/ourtechnology.htm

Thermal Pain must not be dat easy either.

Terminator

hot tub Frank

  • Full Member
  • ***
  • Posts: 440
  • tiger river bengal
Re: Remove Insulation Foam
« Reply #12 on: August 07, 2007, 07:29:42 pm »
i would hate to have those problems

Pathfinder

  • Full Member
  • ***
  • Posts: 497
Re: Remove Insulation Foam
« Reply #13 on: August 07, 2007, 08:05:41 pm »
Rick, there are many takes on the T P design  being able to access the plumbing is more of a marketing than design approach.  Now digging through 2& 5lb closed cell is a huge pain in the ass.   When dealing with tubs like that I use a drywall saw that has interchangeable blades. The blades are sharp enough to cut out chunks but dull enough to not go through the piping.

104 degrees

  • Full Member
  • ***
  • Posts: 384
Re: Remove Insulation Foam
« Reply #14 on: September 19, 2007, 04:06:25 pm »
Quote
You poor bastard.  

FF spas.   More efficient?  Not.   Less prone to leaks?   Not.    Pain in the ass to find a leak?    Bingo!


(poking in my Coleman,  wow!  the plumbing's right in front of my face)   what a novel concept.


Pretty sad when the FF advocates here offer nothing but sarcasm for advice.    And you forgot one:

"try a divining rod,  just point it at the foam and it will steer you to the leak"         :D

How many times have I heard them all say,  "finding a leak in a FF spa is not that hard"    

Appearantly it is.






Cheap spa sales must be hurting ;D Back to the corner for you ;D

Hot Tub Forum

Re: Remove Insulation Foam
« Reply #14 on: September 19, 2007, 04:06:25 pm »

 

Home    Buying Guide    Featured Products    Forums    Reviews    About    Contact   
Copyright ©1998-2024, Whats The Best, Inc. All rights reserved. Site by Take 42