What's the Best Hot Tub

Author Topic: Please help me with my sundcance spa  (Read 2431 times)

sundancespa

  • Junior Member
  • *
  • Posts: 1
Please help me with my sundcance spa
« on: August 16, 2007, 09:51:43 pm »
Hello im new here and I have a sundance spa, sentry 800 from 1993.

Well when i turn on the breaker EVRYTHING turns on the jets and bubbles and only mode and the cycle button will work. You can not turn anything off. And after about 1 minute you see OH (over heated) appear on the screen and then everything shuts off and the control panal has 4 black lines going through it, and then nothing works.
I REALLY want to get this thing going on use it again. Any help is appreciated.

Thanks

Hot Tub Forum

Please help me with my sundcance spa
« on: August 16, 2007, 09:51:43 pm »

tony

  • Ultimate Member
  • *****
  • Posts: 2331
  • 2002 Optima
Re: Please help me with my sundcance spa
« Reply #1 on: August 16, 2007, 10:18:53 pm »
Quote
Hello im new here and I have a sundance spa, sentry 800 from 1993.

Well when i turn on the breaker EVRYTHING turns on the jets and bubbles and only mode and the cycle button will work. You can not turn anything off. And after about 1 minute you see OH (over heated) appear on the screen and then everything shuts off and the control panal has 4 black lines going through it, and then nothing works.
I REALLY want to get this thing going on use it again. Any help is appreciated.

Thanks

I'm not a tech, but from what I've seen it may either be a bad topside (main or auxiliary), temp sensor or control board.  I had something similar happen and the aux topside and temp sensor were replaced.

Hot Tub Forum

Re: Please help me with my sundcance spa
« Reply #1 on: August 16, 2007, 10:18:53 pm »

 

Home    Buying Guide    Featured Products    Forums    Reviews    About    Contact   
Copyright ©1998-2024, Whats The Best, Inc. All rights reserved. Site by Take 42