Author Topic: Nasty Circ Pump Filter (Read 2878 times)

bohms · « **on:** June 16, 2007, 04:00:45 pm »

Today we decided to dump our water since it wasn't looking so clear anymore. My husband pulled out the circ pump filter and it had a gritty, brownish substance on the plastic part. It even looks like something was eating away at the hard plastic. What are we doing wrong?

Hot Tub Forum · « **on:** June 16, 2007, 04:00:45 pm »

Vinny · « **Reply #1 on:** June 16, 2007, 04:04:00 pm »

How old was the water and what was the water chemistry?

I haven't had any problems with chlorine except when I let the water get away from me then the filter does get yucky!

bohms · « **Reply #2 on:** June 16, 2007, 04:46:48 pm »

Water was OLD....5 months and it was a little low on alkaline....everything else was good. We use the Bromine tablets.

The_real_Clown_Shoes · « **Reply #3 on:** June 16, 2007, 05:52:20 pm »

You have a Hot Spring, right?

Make sure you are rotating the duty on the grey stack. Give every filter a little time on it so that one doesn't take the brunt of all the water coming through.

bohms · « **Reply #4 on:** June 16, 2007, 07:41:39 pm »

giraffe - I have an Artesian Piper Glen.

hottubdan · « **Reply #5 on:** June 17, 2007, 10:19:22 am »

Brown deposits are most likely bromine coming out of solution. It is brownish in nature.

Hot Tub Forum · « **Reply #5 on:** June 17, 2007, 10:19:22 am »

Hot Tub Forum

News: